ABB TotalFlow Driver Setup

Module Setup

• Create a new Array-Register Definition and upload the attached ArrayRegisterDefinitions-PCCU-7.79.zip file.

If using redundancy, after making configuration changes or adding new devices, you must force a Re-Sync of the backup server, otherwise the ABB Configuration for tag polling won't work on the backup. Waiting to hear from CirrusLink if it's a bug that needs addessed, or if this will be part of standard procedures.

Creating/Configuring an Analyzer/GC Device

• Create it with the following settings:
  • Name
  • Device
    • Board Type: NGC
  • Connectivity
    • Hostname: (Device IP Address)
    • TCP Port: (Typically 9999)
  • Auto Setup
    • Enable Auto-Discovery: Checked
    • Add All Totalflow Application Definitions: Unchecked
    • Add All Array-Register Definitions: Checked
    • Auto-generate Templates and Poll Group: Unchecked
    • Auto-publish Meter Config: Unchecked
• Click More -> TotalFlow Applications
  • Enable polling on the following apps:
    • 0 - System
    • 30 - GCM Main
    • 38 - Stream 1
    • 39 - Stream 2 (Optional)
    • 40 - Stream 3 (Optional)
    • 41 - Stream 4 (Optional)
    • 46 - Controller
• Click More -> Array Register Templates
  • Import the attached ABB_GC_ArrayRegisterTemplates.csv file
• Click More -> Poll Groups
  • Add a Poll Group with a generic name: "Default Poll Group"
  • Edit "Poll Group Contents" and add the following rows
    • System
      • Array-Register Template: System
      • Application Name: System
      • Enabled: Checked
      • Scan Rate: (desired poll rate in seconds (30) - default: 60)
      • Tag Folder Path: System
    • GCM
      
      • Array-Register Template: GCM Interface
      • Application Name: GCM MAIN - He
      • Enabled: Checked
      • Scan Rate: (desired poll rate in seconds (30) - default: 60)
      • Tag Folder Path: GCM
    • Controller
      
      • Array-Register Template: Controller
      • Application Name: Ctrl-1
      • Enabled: Checked
      • Scan Rate: (desired poll rate in seconds (30) - default: 60)
      • Tag Folder Path: Controller
        
    • Streams 1-4
      • Array-Register Template: ABB GC Stream
      • Application Name: (Stream [1-4] Application Name)
      • Enabled: Checked
      • Scan Rate: (desired poll rate in seconds (30) - default: 60)
      • Tag Folder Path: Stream [1-4]
    • Click Edit to edit the device and change the following settings to increase (re)connection speeds:
      • Auto Setup
        • Enable Auto-Discovery: Unchecked
          
        • Add All Array-Register Definitions: Unchecked

Creating/Configuring a Flow Meter

• Create it with the following settings:
  • Name
  • Device
    • Board Type: G4
  • Connectivity
    • Hostname: (Device IP Address)
    • TCP Port: (Typically 9999)
  • Auto Setup
    • Enable Auto-Discovery: Checked
    • Add All Totalflow Application Definitions: Unchecked
    • Add All Array-Register Definitions: Checked
    • Auto-generate Templates and Poll Group: Unchecked
    • Auto-publish Meter Config: Unchecked
• Click More -> TotalFlow Applications
  • Enable polling on the following apps:
    • 0 - System
    • 7 - I/O Interface
    • 11 - Flow Meter (Tube)
• Click More -> Array Register Templates
  • Import the attached ABB_OrificeFlow_ArrayRegisterTemplates.csv file
  • - or -
  • Import the attached ABB_TurbineFlow_ArrayRegisterTemplates.csv file
• Click More -> Poll Groups
  • Add a Poll Group with a generic name: "Default Poll Group"
  • Edit "Poll Group Contents" and add the following rows
    • System
      • Array-Register Template: System
      • Application Name: System
      • Enabled: Checked
      • Scan Rate: (desired poll rate in seconds (15) - default: 60)
      • Tag Folder Path: System
    • Power
      
      • Array-Register Template: Power
      • Application Name: I/O Interface
      • Enabled: Checked
      • Scan Rate: (desired poll rate in seconds (15) - default: 60)
      • Tag Folder Path: Power
    • Flow Meter
      
      • Array-Register Template: Flow Meter
      • Application Name: (Flow Meter Name/ID)
      • Enabled: Checked
      • Scan Rate: (desired poll rate in seconds (15) - default: 60)
      • Tag Folder Path: Flow Meter
    • Click Edit to edit the device and change the following settings to increase (re)connection speeds:
      • Auto Setup
        • Enable Auto-Discovery: Unchecked
          
        • Add All Array-Register Definitions: Unchecked