Installing Ignition Edge on Moxa UC-8100A

Configure device to have a fast network connection.

If you're unit has ThingsPro on it, all configuration is done using the web interface on the bottom/second ethernet port.

Connect to it and access https://192.168.4.127 to access the interface. 

The login is either admin@moxa.com with password admin1234 or root@moxa.com with password root1234

Connect via SSH and run the following:

sudo apt update
sudo apt upgrade -y
sudo apt install unzip fontconfig

Copy the installation zip file to /home/moxa using WinSCP or download it with the below command:

curl -L -O -H 'Referer: https://inductiveautomation.com/downloads/ignition' https://files.inductiveautomation.com/release/ia/8.1.12/20211118-1003/Ignition-Edge-linux-armhf-8.1.12.zip

Unzip the file to the /usr/local/bin/ignition folder using the following command and delete the old file:

unzip -d /usr/local/bin/ignition Ignition-Edge-linux-armhf-8.1.12.zip
rm Ignition-Edge-linux-armhf-8.1.12.zip

Change the directory to the Ignition installation and make the relevant files executable using the following commands:

cd /usr/local/bin/ignition
chmod +x ignition-gateway
chmod +x *.sh

Install Ignition as a service with the following command:

./ignition.sh install