ABB TotalFlow Driver Setup

• Create a new Array-Register Definition and upload the attached "ArrayRegisterDefinitions.zip" file.

 

Creating/Configuring an Analyzer/GC Device

• Create it with the following settings:
  • Name
  • Device
    • Board Type: NGC
  • Connectivity
    • Hostname: (Device IP Address)
    • TCP Port: (Typically 9999)
  • Auto Setup
    • Enable Auto-Discovery: Checked
    • Add All Totalflow Application Definitions: Unchecked
    • Add All Array-Register Definitions: Checked
    • Auto-generate Templates and Poll Group: Unchecked
    • Auto-publish Meter Config: Unchecked
• Click More -> TotalFlow Applications
• Enable polling on the system (App 0) and appropriate streams (Apps 38-41)
• Click More -> Array Register Templates
  • Import the attached "ABB_GC_ArrayRegisterTemplates.csv" file
• Click More -> Poll Groups
  • Add a Poll Group with a generic name: "Default Poll Group"
  • Edit "Poll Group Contents" and add the following rows
    • System
      • Array-Register Template: System
      • Application Name: System
      • Enabled: Checked
      • Scan Rate: (desired poll rate in seconds - default: 60)
      • Tag Folder Path: System
    • Stream 1
      • Array-Register Template: ABB GC Stream 1
      • Application Name: (Stream 1 Application Name)
      • Enabled: Checked
      • Scan Rate: (desired poll rate in seconds - default: 60)
      • Tag Folder Path: Stream 1
        
    • Streams 2-4 (Optional)
      • Array-Register Template: ABB GC Stream [2-4]
      • Application Name: (Stream [2-4] Application Name)
      • Enabled: Checked
      • Scan Rate: (desired poll rate in seconds - default: 60)
      • Tag Folder Path: Stream [2-4]
    • Click Edit to edit the device and change the following settings:
      • Auto Setup
        • Enable Auto-Discovery: Unchecked
          
        • Add All Array-Register Definitions: Unchecked